Chemical Process Pump

Introduction:

As a leading manufacturer of high-quality pumps, we take pride in our products and work hard to ensure that every customer is satisfied. Our Chemical Process Pump is a perfect example of our commitment to quality, reliability, and durability. This pump is designed to handle corrosive, abrasive, and hazardous liquids, making it an indispensable tool for a wide range of industries, including chemical, pharmaceutical, food processing, and waste management.

Features:

Our Chemical Process Pump possesses the following features:

1) Corrosion-resistant:

The pump is made of materials that are highly resistant to corrosion, which makes them ideal for use in harsh environments where other pumps would quickly deteriorate. Our pumps are made of materials like polypropylene (PP), polyvinylidene fluoride (PVDF), and polytetrafluoroethylene (PTFE), which are highly resistant to acids, bases, and oxidizing agents.

2) High efficiency:

Our pumps are designed to deliver high efficiency, which means that they consume less energy and produce less heat. This results in cost savings for our customers, as well as less wear and tear on the equipment.

3) Low maintenance:

The Chemical Process Pump requires minimal maintenance, which means that it can operate for long periods without breaking down. The pump has few moving parts, and we use high-quality bearings and seals to ensure that it operates smoothly and efficiently.

4) Safe and reliable:

Our pumps are designed with safety in mind. They are equipped with automatic shut-off mechanisms that prevent the pump from operating when there is a problem. Additionally, we use high-quality electrical components that are UL-listed and CSA-certified to ensure reliable operation.

Applications:

Our Chemical Process Pump is widely used in the following applications:

1) Chemical processing:

Our pumps are ideal for handling harsh chemicals, such as acids, alkalis, and solvents. They are commonly used in chemical plants, refineries, and other industrial settings.

2) Pharmaceutical:

The pharmaceutical industry requires pumps that can handle highly viscous and abrasive liquids. Our pumps are designed to handle these materials and are used in pharmaceutical plants, laboratories, and research facilities.

3) Food processing:

The food processing industry requires pumps that are easy to clean and maintain. Our pumps are designed to meet these requirements and are used in food processing plants to handle everything from fruit juice to dairy products.

4) Waste management:

Our pumps are also used in waste management applications, such as pumping wastewater and sludge. They are designed to handle the corrosive and abrasive materials found in these environments.

Conclusion:

Our Chemical Process Pumps are an excellent choice for anyone looking for a high-quality, reliable pump that can handle corrosive, abrasive, or hazardous liquids. With their corrosion-resistant materials, high efficiency, low maintenance, and safety features, our pumps are the ideal choice for a wide range of applications. Contact us today to learn more about our Chemical Process Pump and how it can benefit your business.

Introduction

This type chemical process pump is a single-stage single suction (axial suction) clean water centrifugal pump, which is suitable for transporting corrosive liquids without solid particles and viscosity similar to water. It is designed by ISO 2858 standard.

The temperature of the liquid should be - 20~105℃. It can transport higher temperature liquid with cooling equipment. It is suitable for chemical industry, metallurgy, electric power, paper making, food, pharmaceutical and other industries.

Material

SS304/SS316/SS316L

Feathers

IH chemical process pump has the advantages of reasonable hydraulic performance, reliable layout, small volume, light weight, good cavitation resistance, low power consumption, convenient use and maintenance and high working efficiency. Its structural design can basically meet the installation of all pipelines.

The temperature of the conveying medium of IH chemical pump is - 20 ℃ ~ 105 ℃. If necessary, the double end face seal cooling device is adopted, and the temperature of the conveying medium is 20 ℃ ~ + 280 ℃. It is applicable to chemical, petroleum, metallurgy, electric power, paper making, food, pharmaceutical, environmental protection, wastewater treatment,chemical process and synthetic fiber industries.

IH chemical process pump can install different forms of mechanical seals according to different service conditions. The following are general precautions.

1. As the mechanical seal is generally suitable for use in clean and non suspended particle media, the newly installed pipeline system and liquid storage tank shall be carefully flushed to prevent solid impurities from entering the end face of the mechanical seal and causing seal failure.

2. In the medium easy to crystallize, pay attention to frequent flushing when using mechanical seal. Clean the crystals on the mechanical seal after shutdown and before restart.

3. The mechanical seal shall be removed carefully, and it is not allowed to knock with a hammer or iron, so as not to damage the sealing surfaces of dynamic and static rings.

4. If there is dirt that cannot be removed, try to remove the dirt and wash it before disassembly, so as not to damage the sealing elements.

5. Before installing the mechanical seal, check whether all sealing elements are invalid or damaged. If so, repair or replace them again.

6. The relative friction sealing surface of the moving ring and the stationary ring shall be strictly checked, and no slight scratches, bumps and other defects are allowed. All other parts, including chemical process pump body, impeller, sealing cavity, etc., shall be washed before assembly, especially the dynamic and static ring surfaces, which shall be carefully wiped with clean, soft cloth or cotton yarn, and then coated with a layer of clean grease or engine oil.

7. During assembly, pay attention to eliminate the deviation. Tighten the screws evenly to avoid deflection and seal failure.

8. Correctly adjust the compression amount of the spring. When pulling the rotor by hand after the pump is installed, you should feel that the sealing spring not only has a certain compression amount, but also can rotate quickly and flexibly without biting. If it feels too tight or the disc does not move, it should be loosened appropriately.

9. For mechanical seals with external flushing, the flushing fluid shall be opened before starting to fill the sealing cavity with sealing fluid. When stopping, stop the chemical process pump first and then turn off the sealing flushing fluid.

Why choose us?

• We strive to deliver the best possible service and support to our customers when it comes to End Suction Chemical Pumps.
• We have independent research and development capabilities to maintain a strong technical advantage and development scale.
• We are committed to delivering End Suction Chemical Pumps that offer the greatest value and performance.
• A strong brand not only allows companies to increase revenue and profit margins, but also allows them to better allocate assets and obtain ancillary advantages.
• Our company is committed to providing comprehensive customer service and support with our End Suction Chemical Pumps.
• We have won the affirmation and trust of our customers with our strong strength, mature technology and high quality Chemical Process Pump.
• With our vast experience in manufacturing End Suction Chemical Pumps, you can trust us to deliver high-quality products.
• Now the competition in this field is very fierce; but we will still offer best quality, reasonable price and most considerate service in an endeavor to achieve win-win goal.
• We are a reliable and experienced manufacturer of premium-grade End Suction Chemical Pumps.
• We set scientific research, development, production, sales, service as one.

Hot Tags: chemical process pump, China chemical process pump suppliers, manufacturers, factory