Treatment method of bearing heating in slurry pump
What are the treatment methods for the bearing heating sometimes during the use of the slurry pump? The following editor will give you an introduction.
1. If the cold water is not turned on or the cooling water tank is blocked, the cooling water function should be turned on or the cooling water channel should be cleared.
2. The equipment is not well lubricated. The amount of lubricating oil should be adjusted according to the instructions.
3. The lubricating oil is not clean and there are impurities in the oil. The bearings should be cleaned and the lubricant should be changed.
4. The direction of the thrust bearing is wrong. According to the inlet pressure, adjust the thrust bearing direction.
5. The air outlet of the bearing is blocked, which causes the hot air in the bearing box to not be discharged, which increases the temperature of the equipment. The air outlet should be cleaned.







