Problems Caused By The Wear Of The Flow Parts Of The Slurry Pump
The problems caused by the wear of slurry pumps are the most critical and primary considerations for slurry pumps at present.
The centrifugal slurry pump is a kind of centrifugal pump. It is a device that increases the energy of the liquid water and solid particles by the centrifugal force generated by the rotation of the impeller of the pump. The design principle of the centrifugal slurry pump The design principle is basically the same as that of ordinary centrifugal pumps. But what the slurry pump transports is a mixed fluid of liquid and solid, and its working medium is no longer just a simple one-way fluid. From this point of view, its design principle is different from the design method of ordinary centrifugal pumps. At this stage, most of the domestic traditional slurry pump designs are empirical designs based on unidirectional flow theory. The shaft seal of the slurry pump designed by this design method has serious leakage, low work efficiency, poor wear resistance of the overflow part, and short use time.
At present, there are two major problems in the work of slurry pumps that need to be solved urgently:
First, the problem is the wear and tear of the parts in the flow part of the slurry pump.
Second, the problem is the low efficiency of the centrifugal slurry pump.
Because the parts of the centrifugal slurry pump flow through can directly lead to the loss of working materials, it will also cause a series of indirect consequences, such as safety problems, service life problems, etc., resulting in the economic efficiency of the slurry pump. Fully manifested.
The problems caused by slurry pump wear are mainly manifested in:
1. Affect work efficiency. Due to the mutual wear between the impeller and the pump body, the internal volume efficiency of the pump gradually decreases, and the flow surface becomes uneven with the increase of wear, which seriously affects the working efficiency of the centrifugal slurry pump.
2. Increased maintenance time. Due to the increasing degree of wear in the slurry pump, regular maintenance can no longer guarantee the normal operation of the slurry pump, resulting in a significant increase in the number of maintenance, and the maintenance work will gradually lengthen.
3. Reduced the quality of operation. The abrasion caused by the flow surface of the centrifugal slurry pump results in unevenness and promotes the development of local disturbance and cavitation of the water flow. Asymmetric wear of the impeller will cause mechanical imbalance. These reasons will aggravate the vibration of the centrifugal pump, shorten the life of bearings and mechanical seals, and reduce the quality of operation.







