The Difference Between Single Suction Slurry Pump And Double Suction Slurry Pump
Slurry pumps can be divided into single-stage pumps and multi-stage pumps according to the number of impellers. The way of sucking water from the impellers can be divided into single-suction slurry pumps and double-suction slurry pumps. The following is a detailed introduction to single-suction pumps and The difference between double suction pumps.
Single-suction pump refers to horizontal axial suction and upward radial discharge. The pump has a suspension structure. During maintenance, it is not necessary to disassemble the inlet and outlet pipes, and the rotor parts can be withdrawn for maintenance.
As an important form of centrifugal pump, double-suction pump is widely used in engineering because of its high lift and large flow. The impeller of this pump type is actually composed of two back-to-back impellers, and the water flow from the impellers merges into a volute.
The difference between the two:
1. The impeller of the single-suction pump can only enter water at one end, while the double-suction pump has water at both ends of the impeller, that is, two inlets.
2. Compared with single-suction pumps, double-suction pumps are more suitable for conveying large flows and require stable operation. When the manufacturer has high requirements for the flow rate of the pump, if you choose a single-suction pump, you need to have a large pump inlet and outlet diameter. At the same time, the speed of the pump should not be too large. If you choose a double-suction pump, the size and weight of the pump can be used. Relatively reduced, the rotational speed can also be increased, and the volumetric efficiency will also increase.
3. The anti-cavitation ability of the double-suction pump is stronger than that of the single-suction pump. Since the medium is sucked in at both ends of the impeller, hydraulic symmetry will be formed, so that the balanced axial thrust effect of the double-suction pump is better than that of the single-suction pump, and it runs more smoothly. Moreover, the flow rate of the medium is low, and the impeller is not prone to cavitation.
4. The double-suction pump has one more sealed cavity than the single-suction pump, so the cost of the double-suction pump is relatively higher.







