Characteristics of vertical double suction pump
1. The parameters and parts of the vertical split pump are highly standardized, serialized and universal, which is common with the parts of the horizontal split pump, and the maintenance is convenient and fast.

2. The vertical split pump is installed vertically, the suction inlet and outlet are in the horizontal direction, and the separation surfaces of the pump body and pump cover are vertically separated on the shaft center line. During maintenance, the pump cover can be opened, the rotor parts can be taken out for maintenance and parts replacement without dismantling the inlet and outlet pipelines and motor.
3. The design is novel, the structure is unique, and the operation and management fee is saved. According to the medium conditions, the newly designed guide bearing can be selected. The high-pressure return liquid cleaned at the water outlet of the water pump is used to enter the pump base through the return pipe for self lubrication. There is no need for lubricating oil, so it does not pollute the transmission medium and eliminates the trouble of regular oil injection. If the transmission medium has impurities, Clean cooling water can also be connected externally.
4. The upper bearing is also equipped with thrust bearing, which can bear the self weight thrust of the pump impeller. The upper bearing of the pump adopts rolling bearing (medium and large pump plus thrust bearing), which is lubricated with grease, and a cooling chamber is set on the bearing body. The shaft seal adopts two forms: soft packing seal and mechanical seal.
5. High efficiency and good performance: the impeller is designed and manufactured with a new double suction structure hydraulic model, which eliminates the shortcomings of the original vertical pump with large radial tension. During operation, the impeller is always suspended, with the characteristics of high efficiency and good performance. At the same time, it also reduces the plane wear of the thrust bearing, so as to improve the service life of the water pump and reduce the operation cost.
6. Compact structure and beautiful appearance: this series of pumps is a detachable structure with integrated machine and pump and beautiful appearance. Its vertical structure determines that the installation covers a small area, which not only reduces the area of the pump house, improves the area and space, but also saves a lot of infrastructure investment. Convenient installation: the inlet and outlet flanges of the pump are located on the same center line, the center is low, which is convenient for pipeline layout, and the design of the pump room is more reasonable and practical.
7. From the motor end to the pump, the pump can rotate counterclockwise / clockwise, and the import and export direction can be confirmed when ordering.







