Factors affecting cavitation of slurry pump
What are the factors that affect the cavitation of the slurry pump? The following editor will give you an introduction.
1. The influence of temperature Due to the change of fluid temperature, the physical characteristics that affect cavitation (such as vaporization pressure, gas solubility and surface tension) will change significantly. Facts have proved that the mechanism of the influence of temperature on cavitation is more complicated and needs to be judged according to the actual situation.
2. The effect of purity (concentration of solid particles contained) The more solid impurities in the fluid, the more cavitation nuclei increase. This accelerates the occurrence and occurrence of cavitation.
3. Mud pumps for transporting polar media (such as ordinary water pumps), mud pumps for transporting non-polar media (pumps for transporting benzene, alkanes and other organic substances), pH value and electrolyte concentration for cavitation mechanism. The effect is different. Cavitation corrosion of slurry pumps that transport polar media may include mechanical action, chemical corrosion (related to liquid pH) and electrochemical corrosion (related to liquid electrolyte concentration). On the other hand, the cavitation damage and corrosion damage of the slurry pump that transports non-polar media can only produce mechanical effects.
4. The influence of gas solubility Foreign studies have shown that the dissolved gas content in the fluid will promote the formation and development of cavitation nuclei.
5. The influence of vaporization pressure According to research, higher vaporization pressure will cause cavitation damage to increase first and then decrease. This is because as the vapor pressure increases, the number of unstable bubble nuclei formed in the fluid also increases, which leads to an increase in the number of bubble bursts, an increase in shock wave intensity and an increase in cavitation rate. However, as the vapor pressure continues to rise and the number of bubbles increases to a certain limit, the bubble group will form a "layer spacing" effect, which prevents the shock wave from proceeding, the strength is weakened, and cavitation damage gradually occurs.







