Matters needing attention in the transportation and storage of slurry pumps
What are the matters needing attention when the slurry pump is transported and stored? The following editor will give you an introduction.
1. Slurry pumps should be packed in boxes and follow the principles of being suitable for transportation, easy installation and searching.
2. Before assembling, remove all processing garbage, such as metal cutting, filling, etc., from the inside of each component, and also remove all rolling chips, scale grease, etc. from the inner and outer surfaces. The steel structure should be shot peened before the first coating.
3. For all parts of the slurry pump that need to be painted, the metal surface must be cleaned according to relevant technical regulations before painting. Brush the second primer and the second topcoat. The color of the second topcoat is determined by Party A and applied on site. The paint materials are provided by Party B, and high-quality paint is selected. The paint color is set to sky blue.
4. The slurry pump should be suitable for transportation to prevent damage during transportation and storage.
5. The anti-corrosion paint must be painted before packaging to prevent corrosion during transportation and storage







