Features of slurry pump packing seal
What are the characteristics of slurry pump packing seal? The following editor will give you an introduction.
The characteristics of slurry pump packing seal are mainly manifested in its structure, price, reasons for seal leakage and shaft seal failure. Therefore, these aspects should be strictly controlled during use, and the seal should be well sealed to prevent leakage.
1. When the packing seal is used as the shaft seal of the slurry pump, there are the following problems that need to be paid attention to:
① The packing is in direct contact with the shaft and rotates relative to each other, causing wear of the shaft and the shaft sleeve. Therefore, the shaft sleeve should be replaced regularly or irregularly.
②In order to dissipate the frictional heat generated between the packing and the shaft or sleeve in time, the packing seal of the slurry pump must maintain a certain amount of leakage, which is not easy to control.
③The friction between the packing and the shaft or sleeve causes the effective power of the motor to decrease and consumes electric energy.
2. The packing shaft seal has simple structure, convenient maintenance and low packing price.
Leakage way: through the leakage of the interface between the packing and the stationary part, and through the leakage of the packing itself. Through the leakage between the packing and the moving interface.
3. Generally, the leakage of packing seal is about 6 drops/min.







