The method to make the slurry pump work at high temperature

What are the methods to make the slurry pump work at high temperature? The following editor will give you an introduction.

1. The axial flow fan can be controlled manually, and the axial flow fan can still run after the main motor is stopped to fully cool the main motor.

2. Slowing down the insulation aging speed of the main motor prolongs its service life and is more resistant to high temperatures.

3. After the voltage is adjusted, the operating current of the slurry pump is reduced to 210A, and the heat generation is relatively reduced, thereby lowering the temperature.

4. Try to balance the load distribution of the two busbars to prevent a certain busbar from dropping too much due to overload.

5. The slurry pump has high speed, large wind pressure and air volume, and the cooling effect is greatly enhanced. Under the same ambient temperature and load current, the temperature of the main motor has dropped by 12℃, and the temperature of the main motor has not exceeded the limit in summer.


You Might Also Like

Send Inquiry