Storage and transportation requirements for vertical slurry pumps

What are the storage and transportation requirements for vertical slurry pumps? The following editor will give you an introduction.

1. All parts of the vertical slurry pump that need to be painted must be cleaned on the metal surface according to the relevant technical regulations before painting. Brush the second primer and the second topcoat. The color of the second topcoat is determined by Party A and applied on site. The paint materials are provided by Party B, and high-quality paint is selected. The paint color is set to sky blue.

2. Before assembling, remove all processing garbage, such as metal cutting, filling, etc., from the inside of each component, and also remove all rolling chips, scale grease, etc. from the inner and outer surfaces. The steel structure should be shot peened before the first coating.

3. There are obvious text instructions on the outer wall of the packing box.

4. The anti-corrosion paint must be painted before packaging to prevent corrosion during transportation and storage.

5. All electrical equipment must be packed strictly to ensure that they are not damaged during transportation and storage, and to prevent moisture.

6. The slurry pump should be suitable for transportation to prevent damage during transportation and storage.

7. Vertical slurry pumps should be packed in boxes according to classification and should follow the principles of being suitable for transportation, easy for installation and searching.